| Wireless 72Mbps
Point-to-Point Link |
Data Sheet |
| |
| Radio Technology |
|
| Frequency bands |
3.4 - 3.7 GHz |
5.725 - 5.825 GHz |
|
| Duplex Mode |
FDD or TDD |
TDD |
|
| Channel size |
3MHz, 3.5MHz, 6MHz
7MHz, 12MHz, 14MHz |
20MHz |
|
| RF Dynamic Range |
>50dB |
>50dB |
|
| Over The Air Rate |
Up to 70Mbps in 14MHz channel |
Up to 72Mbps per channel |
|
| Maximum Tx Power |
+28dBm |
-20 to +20dBm |
|
| Rx Sensitivity |
-84dBm @ 7MHz ch. (BER 10E-9) |
-86dBm @ 6Mbps (BER 10E-9) |
|
| Modulation Coding |
Dynamic Adaptive Modulation |
|
| Coding |
BPSK, QPSK, 16QAM, 64QAM |
|
| Coding Rates |
1/2, 2/3, 3/4 |
|
| Over The Air Encryption |
DES and 3DES |
Proprietary 64-bit encryption |
|
| Error Correction |
Automatic Repeat Request |
|
| Range |
>10km (6mi) NLOS |
>10km (6mi) NLOS |
| |
with high-gain PtP antenna |
with high-gain PtP antenna |
| |
>50km (30mi) LOS |
>80km (50mi) LOS |
| |
with high-gain PtP antenna |
with high-gain PtP antenna |
|
| IF Cable |
Maximum length up to 76m (250 ft)
using RG5U |
| |
Maximum length up to 152m (500 ft)
using RG11U |
| |
152m (500 ft) using LMR cabling |
| |
Max. allowable losses at 2.5GHz
: |
| |
- RG6: 10dB/30m (100 ft) at 25°C |
| |
- RG11: 5dB/30m (100 ft) at 25°C |
|
| |
| Networking |
|
| Protocols |
Transparent Bridging, DHCP pass-through,
VLAN pass-through |
| |
802.3x Ethernet flow control 802.1q/p
network traffic prioritisation |
|
| Network Services |
Transparent to 802.3 services and
applications |
|
| Network Management |
Locally through serial console, Web
interface and SNMP |
| |
CLI via Telnet and local console |
|
| Backhaul Connection |
10/100BaseT Ethernet (RJ45) |
|
| Optional TDM ports |
1 to 4 T1/E1 TDM ports |
|
| |
E1 Specs |
T1 Specs |
|
| Standards |
ETS TBR 12/13, ITU-T Rec. G.703 |
AT&T TR-62411, ANSI T1.403, ITU-T Rec.
G703, |
| |
G.704, F.706, G.732, G.821, G.823 |
G.704, G.706, G.732, |
| |
G.826 |
G.821, G.823, G.826, |
|
| Framing |
Unframed, CRC4, FAS/NFAS |
Unframed, D4 (SF), ESF |
|
| Data rate |
2048 Kbps |
1544 Kbps |
|
| Line Code |
HDB3, AMI |
AMI, B8ZS |
|
| Connector |
Balanced: RJ-48c, 8-pin |
Balanced: RJ-48c, 8-pin |
|
| Line Ompedance |
Balanced 120 Ohm |
Balanced 100 Ohm |
|
| Jitter |
ITU-T G.823 |
AT&T TR-62411, ITU-T G.824 |
|
| Clocking |
Adaptive, Loopback, Internal |
Adaptive, Loopback, Internal |
|
| Line Protection |
ITU-T K-20, K-21 |
Bellcore GR 1089 |
|